MACTRIB

Machining & Tribology Research Group



 

Home Page

People

Research Topics

Opportunities & Conferences

Services - Industry

Journals & Others Link's

Contact

 

 Publications (since 2011)

 

 

 

Ü

Books

Ü

Book Chapters

Ü

International Journals “ISI  Web of Science"

Ü

Others International Journals and National Journals

Ü

Conferences 

Ü

Editorials and Book Reviews

 

 

Books

 

 

r

U. S. Dixit, M. Hazarika, J. Paulo Davim, A Brief History of Mechanical Engineering, Springer, Heidelberg, 2016,  ISBN: 978-3-319-42916-8

r

N. Natarajan, V. Krishnaraj, J. Paulo Davim, Metal Matrix Composites, Springer, Heidelberg, 2015,  ISBN: 978-3-319-02984-9

r

V. Krishnaraj, R. Zitoune, J. Paulo Davim, Drilling of Polymer-Matrix Composites, Springer, Heidelberg, 2013,  ISBN: 978-3-642-38344-1

r

U. S. Dixit, D. K. Sharma, J. Paulo Davim, Environmentally-Friendly Machining, Springer, New York, 2012,  ISBN: 978-1-4641-2307-2

r

R. Quiza, O. López-Armas, J. Paulo Davim, Hybrid Modeling and Optimization of Manufacturing, Springer, Heidelberg, 2012,  ISBN: 978-3-642-28084-9

r

P. Sahoo, T. Barman, J. Paulo Davim, Fractal Analysis in Machining, Springer, Heidelberg, 2011,  ISBN: 978-3-642-17921-1

 

Back

Book Chapters

 

 

r

S. Datta, B. Roy and J. Paulo Davim "Computational materials design: Different concepts and aspects ", Chapter 1, (1-12) in Datta, S., Davim, J.P. (Eds.), Computational Approaches to Materials Design, IGI Global, Hershey, 2016, ISBN: 9781522502906

 

S. Roy, S. Bhowmik, J. Paulo Davim and K. Kumar "Estimation of mechanical and tribological properties of epoxy-based green composites", Chapter 5, (96-124) in Verma, D., Jain, S., Zhang, X., Gope P.C., (Eds.), Green Approaches to Biocomposite Materials Science and Engineering, IGI Global, Hershey, 2016, ISBN: 9781522504245

 

S. Arumugam, G. Sriram, T. Rajmohan and J. Paulo Davim, "Multi-objective optimization of engine parameters while bio-lubricant-biofuel combination of VCR engine using Taguchi-Grey approach", Chapter 4, (105-123) in Davim, J.P. (Ed.), Ecotribology, Springer, Heidelberg, 2016, ISBN: 978-3-319-24007-7

 

C.H. Lauro, R.B.D. Pereira, L.C. Brandão and J. Paulo Davim, "Design experiments - statistical and artificial intelligence analysis for the improvement of machining processes", Chapter 3, (89-107) in Davim, J.P. (Ed.), Design Experiments in Production Engineering, Springer, Heidelberg, 2016, ISBN: 978-3-319-23838-8

 

V.N. Gaitonde, S.R. Karnik and J. Paulo Davim, "Multiple performance optimization in drillimg using Taguchi method with utility and modified utility concepts", Chapter 5, (99-115) in Davim, J.P. (Ed.), Materials Forming and Machining: Research & Development, Woodhead/Elsevier, Cambridge, 2015, ISBN: 978 0 85709 483 4

 

R. Pramod, S. Basavarajappa and J. Paulo Davim "A review on investigations in drillling of fiber reinforced plastics", Chapter 7, (179-194) in Davim J.P. (Ed.), Machinability of fibre-reinforced plastics, DE Gruyter, Berlin, 2015, ISBN: 978 3 11 029222 0 

 

K. Palanikumar, T. Srinivasan, K. Rajagopal and J. Paulo Davim "Drilling of high impact polystyrene composites materials", Chapter 6, (163-178) in Davim J.P. (Ed.), Machinability of fibre-reinforced plastics, DE Gruyter, Berlin, 2015, ISBN: 978 3 11 029222 0 

 

J. Babu, J. Philip, T. Zacharia and J. Paulo Davim "Delamination in composite materials: measurement, assessment and prediction", Chapter 5, (139-162) in Davim J.P. (Ed.), Machinability of fibre-reinforced plastics, DE Gruyter, Berlin, 2015, ISBN: 978 3 11 029222 0 

 

C. H. Lauro, L.C. Brandão, S. L. M. Ribeiro Filho, R.A. F. Valente and J. Paulo Davim "Finite element method in machining processes: a review", Chapter 3, (63-97) in Davim J.P. (Ed.), Modern Manufacturing Engineering, Springer, Heidelberg, 2015, ISBN: 978 3 319 20151 1

 

D. Carou, E. M. Rubio and J. Paulo Davim "Machinability of magnesium and its alloys: a review", Chapter 5, (133-152) in Davim J.P. (Ed.), Traditional Machining Processes-research advances, Springer, Heidelberg, 2015, ISBN: 978 3 662 45087 1

 

C. H. Lauro, L. C. Brandão, S. M. Ribeiro Filho and J. Paulo Davim, "Quality in the machining: characteristics and techniques to obtain good results", Chapter 5 (51-75), in Davim, J.P (Ed.), Manufacturing Engineering: new research, NOVA Publishers, New York, 2015, ISBN: 978-1-63463-378-9

 

L. Santo, F. Trovalusci and J. Paulo Davim "Laser applications in field of plastics", Chapter 12, Volume 9 (243-260) in B. Yilbas (Ed.) and M. S. Hashmi (Editor in Chief), Comprehensive Materials Processing, Elsevier Sc., London, 2014, ISBN: 978 0 08 096533 8

 

P. Campos, J. Paulo Davim, J. R. Ferreira, A.P. Paiva and P.P. Balestrassi  "The machinability of hard materials- a review", Chapter 5, (145-166) in Davim, J.P. (Ed.), Machinability of Advanced Materials, ISTE-Wiley, London, 2014 ISBN: 978-1-84821-396-8

 

P. Sahoo, S. Roy and J. Paulo Davim "Design and selection of chemically deposited Ni-P-W coatings for optimum tribological behavior", Chapter 2, (45-72) in Santo, L., Davim, J.P. (Eds.), Surface Engineering Techniques and Applications, IGI Global, Hershey, 2014, ISBN: 9781466652200

 

V. Gaitonde, S. Karnik, I. Silva and J. Paulo Davim, "Surface roughness evaluation in microturning of AISI 1045 steel using response surface methodology", Chapter 4 (69-88), in Davim, J.P (Ed.), Machining - Operations, Technology and Management, NOVA Publishers, New York, 2013, ISBN: 978-1-62100-579-7

 

K. Palanikumar and J. Paulo Davim "Electrical discharge machining: study on machining characteristics of WC/Co composites", Chapter 5, (135-165) in Davim J.P. (Ed.), Machining and Machine-Tools: Research & Development, Woodhead/Chandos, Cambridge/Oxford, 2013, ISBN: 978 0 85709 154 3

 

P. Sahoo and J. Paulo Davim "Tribology of ceramics and ceramic matrix composites", Chapter 2, (211-231) in Menezes, P.L., Nosonovsky M., Ingole S.P., Kailas S.V., Lovell M.R.. (Ed.s), Tribology for Scientists and Engineers, Springer, Heidelberg, 2013, ISBN: 978-1-4614-1945-7

 

M. J. Jackson, M. Whitfield, G. M. Robinson, J. Morrel and J. Paulo Davim "Tribology of machining", Chapter 2, (67-101) in Davim, J.P. (Ed.), Tribology in Manufacturing Technology, Springer, Heidelberg, 2013, ISBN: 978-3-642-31682-1

 

J. Y. Sheikh-Ahmad and J. Paulo Davim "Tool wear in machining processes for composites", Chapter 5, (116-153) in Hocheng, H. (Ed.), Machining Technology for Composite Materials: Principles & Practice, Woodhead/Chandos, Cambridge/Oxford, 2012, ISBN: 978 0 85709 030 0

 

V. N. Gaitonde, S. R. Karnik and J. Paulo Davim "Computational methods and optimization in machining of metal matrix composites", Chapter 7, (143-162) in Davim, J.P. (Ed.), Machining of Metal Matrix Composites, Springer, London, 2012, ISBN: 978-0-85729-937-6

 

L. Santo and J. Paulo Davim "Nanocomposite coatings: a review", Chapter 4, (97-120) in Davim, J.P. (Ed.), Materials and Surface Engineering: Research & Development, Woodhead/Chandos, Cambridge/Oxford, 2012, ISBN: 978 0 85709 151 2

 

V. N. Gaitonde, S. R. Karnik and J. Paulo Davim "Minimising burr size in drilling: integrating response surface methodology with particle swarm optimisation", Chapter 7, (259-292) in Davim, J.P. (Ed.), Mechatronics and Manufacturing Engineering: Research & Development, Woodhead/Chandos, Cambridge/Oxford, 2012, ISBN: 978 0 85709 150 6

 

K. Palanikumar, B. Latha and J. Paulo Davim "Application of Taguchi method with grey fuzzy logic for the optimization of machining parameters in machining composites", Chapter 9, (219-241) in Davim, J.P. (Ed.), Computational Methods for Optimizing Manufacturing Technology , IGI Global, Hershey, 2012, ISBN13: 9781466601284

 

V. N. Gaitonde, S. R. Karnik and J. Paulo Davim "Application of particle swarm optimization for achieving desired surface roughness in tungsten-copper alloy machining", Chapter 6, (144-161) in Davim, J.P. (Ed.), Computational Methods for Optimizing Manufacturing Technology , IGI Global, Hershey, 2012, ISBN13: 9781466601284

 

K. Palanikumar, S. Prakash and J. Paulo Davim, "Investigation of optimum parameters for multiple performance characteristics in drilling wood composites (MDF) using Grey-Taguchi method", Chapter 4 (87-108), in Davim, J.P (Ed.), Wood and Wood Products, NOVA Publishers, New York, 2012, ISBN: 978-1-62081-973-9

 

L. Valim de Freitas, A. P. B. Rodrigues de Freitas , F. A. Silva Marins, E. V. Veraszto, J. T. Franco de Camargo, J. Paulo Davim and M. Borges da Silva "Contributions of multivariate statistics in oil and gas industry", Chapter 1, (3-14) in Valim de Freitas L, Rodrigues de Freitas A.P.B. (Eds.), Multivariate analysis in management, engineering and the sciences, InTech, Rijeka, 2012, ISBN: 978-953-51-0921-1

 

Nuno Marques and J. Paulo Davim, "Tribological behaviour of PEEK (Poly-ether-ether-ketone) materials to biomedical applications", Chapter 6 (159-168), in Davim, J.P (Ed.), Biomedical Tribology, NOVA Publishers, New York, 2012, ISBN: 978-1-61470-056-2

 

T. Rajmohan, K. Palanikumar and J. Paulo Davim, "Optimization of machining parameters for multiple performances in drilling hybrid composites using desirability-based approach", Chapter 8 (169-190), in Davim, J.P (Ed.), Metal Matrix Composites, NOVA Publishers, New York, 2012, ISBN: 978-1-61209-771-8

 

S. Basavarajappa, M. PrasannaKumar and J. Paulo Davim, "Driling of metal matrix composites; a brief overview", Chapter 7 (157-167), in Davim, J.P (Ed.), Metal Matrix Composites, NOVA Publishers, New York, 2012, ISBN: 978-1-61209-771-8

 

N. Fountas, A. Kimpenis, N.M. Vaxevanidis and J. Paulo Davim "Single and multi-objective optimization methodologies in CNC machining", Chapter 7, (187-218) in Davim, J.P. (Ed.), Statistical and Computational Methods in Manufacturing, Springer, Heidelberg, 2012, ISBN: 978-3-642-25858-9

 

R.Quiza and J. Paulo Davim "Computational methods and optimization", Chapter 6, (177-208) in Davim, J.P. (Ed.), Machining of Hard Materials, Springer, London, 2011, ISBN: 978-1-84996-449-4

 

A. M Abrão, J.L.S. Ribeiro and J. Paulo Davim "Surface integrity", Chapter 4, (115-141) in Davim, J.P. (Ed.), Machining of Hard Materials, Springer, London, 2011, ISBN: 978-1-84996-449-4

 

R. Quiza and J. Paulo Davim "Combining the finite element method and artificial intelligence in manufacturing modelling and optimization", Chapter 6, (201-239) in Davim, J.P. (Ed.), FEM in Manufacturing Processes, ISTE-Wiley, London, 2011 ISBN: 978-1-84821-282-4

 

Loredana Santo and J. Paulo Davim, "Laser cladding: an overview", Chapter 10 (367-382), in Maxim Thys and Eugene Desmet (Eds.), Laser Beams: Theory, Properties and Applications, NOVA Publishers, New York, 2011 ISBN: 978-1-60876-266-8

 

 

 Back

 International Journals "SCI - ISI Web of  Science"

Journals-JCR- ISI Web of Science (Thomson Reuters)

(2015)

*****  [Impact Factor (IF) 2015 > 3,0]

****    [Impact Factor (IF) 2015 > 2,5]

***      [Impact Factor (IF) 2015 > 2,0]

**        [Impact Factor (IF) 2015 > 1,5]

*           [Impact Factor (IF) 2015 > 1,0]

[Engineering, Mechanical-Median IF(2015)= 1,091; Engineering, Manufacturing-Median IF(2015)= 1,369; Engineering, Industrial-Median IF(2015)= 1,452; Engineering, Multidisciplinary-Median IF(2015)= 1,000; Materials Science, Composites-Median IF(2015)= 1,046; Materials Science, Ceramics-Median IF(2015)= 0,789]; Materials Science, Characterization & Testing-Median IF(2015)= 0,923]; Metallurgy & Metallurgical Engineering-Median IF(2015)= 0,861]

Source JCR, Courtesy of Thomson-Reuters

 

Journals (SCImago)

(2015)

Q1 - First Quarter

Q2 - Second Quarter

 

Q3 - Third Quarter

Q4 - Fourth Quarter

Source SJR, Courtesy SCImago

r

 

2016

 

Q3 R. Ferreira, J. Rehor, C.H. Lauro, D. Carou and J. Paulo Davim, "Analysis of the hard turning of AISI H13 steel with ceramic tool based on the tool geometry: surface roughnessm tool wear and their relation", Journal of The Brazilian Society of Mechanical Sciences and Engineering, Springer, 38, (2016), 2413-2420.

(Impact factor 2015-0,963)

Q2 J. Babu, N.P. Alex, K.P. Mohan, J. Philip and J. Paulo Davim, "Examination and modification of equivalent delamination factor for assessment of high speed drilling", Journal of Mechanical Science and Technology, Springer, 30, (2016), 5159-5165.

(Impact factor 2015-0,761)

Q1***** R. Palanivel, I. Dinaharan R.F. Laubscher, J. Paulo Davim, "Influence of boron nitride nanoparticles on microstructure and wear behaviour of AA6082/TiB2 hybrid aluminium composites synthesized by friction stir processing", Materials & Design, Elsevier Sc., 106, (2016), 195-204.

(Impact factor 2015-3,997)

 Q1**C. H. Lauro, S. Ribeiro Filho L. C. Brandão and J. Paulo Davim "Analysis of behavior biocompatible titanium alloy (Ti-6Al-7Nb) in the micro-cutting ", Measurement, Elsevier Sc., 93, (2016), 529-540.

(Impact factor 2015-1,742)

 Q1*R. Ferreira, D. Carou, C.H. Lauro and J. Paulo Davim, "Surface roughness investigation in the hard turning of steel using ceramic tools", Materials and Manufacturing Processes, Taylor & Francis, 31, (2016), 648-652.

 (Impact factor 2015-1,421)

 Q2 T. Rajmohan, K. Palanikumar, J. Paulo Davim and A.A. Premnath, "Modeling and optimization in tribological parameters of poyether ether ketone matrix composites using D-optimal design", Journal of Thermoplastic Composite Materials, Sage, 29, 2, (2016), 161-188.

(Impact factor 2015-0,922)

 Q1***** K. Gupta, R.F. Laubscher, J. Paulo Davim and N.K. Jain, "Recent developments in sustainable manufacturing of gears: a review", Journal of Cleaner Production, Elsevier Sc., 112, (2016), 3320-3330.

(Impact factor 2015-4,959)

 Q1** W.B. Rashid, S. Goel, J. Paulo Davim and S.N. Joshi "Parametric design optimization of hard turning of AISI 4340 steel (69HRC)", International Journal of Advanced Manufacturing Technology, Springer, 82, (2016), 451-462.

(Impact factor 2015-1,568)

Q1* L. V. Pinho, D. Carou and J. Paulo Davim, "Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics: assessing the of the temperature of the drill", Journal of Composite Materials, Sage, 50, 2, (2016), 179-189.

(Impact factor 2015-1,242)

2015

 

Q1** C.H. Lauro, L.C. Brandão, D. Carou and J. Paulo Davim "Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hradened AISI H13 steel", International Journal of Advanced Manufacturing Technology, Springer, 81, (2015), 1591-1599.

(Impact factor 2015-1,568)

Q2* C.H. Lauro, L.C. Brandão, T.H. Panzera and J. Paulo Davim "Surface integrity in the micromachining - a review", Reviews on Advanced Materials Science, IPME, 40, 3, (2015), 227-234.

(Impact factor 2015-1,245)

Q2* N. Azevedo, J.S. Farias, R. P. Bastos, J. Paulo Davim, R.J. A. Sousa "Lubrication aspects during single point incremental forming for steel and aluminium materials", International Journal of Precision Engineering and Manufacturing, Springer, 16, 3, (2015), 589-595.

(Impact factor 2015-1,075)

Q3 D. Carou, E. Rubio and J. Paulo Davim "A note on the use of the minimum quantity lubrication (MQL) system in turning", Industrial Lubrication and Tribology, Emerald, 67, 3, (2015), 256-261.

(Impact factor 2015-0,406)

Q1 D. Carou, E. Rubio and J. Paulo Davim "Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology", Journal of Engineering Manufacture, Proc Instn Mech Engrs Part B, Sage, 229, 2, (2015), 365-371.

(Impact factor 2014-0,978)

Q1** N. Khanna, J. Paulo Davim "Design-experiments application in machining titanium alloys for aerospace structural components", Measurement, Elsevier Sc., 61, (2015), 280-290.

(Impact factor 2015-1,742)

 

2014

 

Q1* C. H. Lauro, L. C. Brandão, D. Baldo, R. A. Reis, J. Paulo Davim "Monitoring and processing signal applied in machining processes - a review", Measurement, Elsevier Sc., 58, (2014), 73-86.

(Impact factor 2014-1,484)

Q2* D. Carou, E. M. Rubio, J. Paulo Davim "Discontinuous cutting: failure mechanisms, tool materials and temperature study - a review", Reviews on Advanced Materials Science, IPME, 38, 2, (2014), 110-124.

(Impact factor 2014-1,161)

Q3 J.C. Horta Gutiérrez, J. Campos Rubio, P.E. Faria, J. Paulo Davim "Machining behavior of polymer composites materials for automotive applications", Polímeros, ABPol, 24, 6, (2014), 711-719.

(Impact factor 2014-0,474)

Q1* D. Carou, E. M. Rubio, C. H. Lauro, J. Paulo Davim "Experimental investigation on finish intermittent turning of UNS M11917 magnesium alloy under dry machining", International Journal of Advanced Manufacturing Technology, Springer, 75, (2014), 887-898.

(Impact factor 2014-1,458)

Q1* L. E. Sanchez, H. J. Mello, R. R. Neto, J. Paulo Davim "Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation", International Journal of Advanced Manufacturing Technology, Springer, 73, (2014), 887-898.

(Impact factor 2014-1,458)

Q1* D. Carou, E. Rubio, C. H. Lauro, J. Paulo Davim "Experimental investigation on surface finish during intermittent turning of UNS M11917 magnesium alloy under dry and near dry machining conditions", Measurement, Elsevier Sc., 56, (2014), 136-154.

(Impact factor 2014-1,484)

Q1* V. N. Gaitonde, S. R. Karnik, J. Campos Rubio, W.L. Leite, J. Paulo Davim "Experimental studies on hole quality and machinability characteristics in drilling of unreinforced and reinforced polyamides", Journal of Composite Materials, Sage, 48, 1, (2014), 21-36.

(Impact factor 2014-1,173)

 

2013

 

Q1**** J. Campos Rubio, L.J. Da Silva, W. L. Leite, T.H. Panzera, S.L. Filho, J. Paulo Davim "Investigations on drilling process of unreinforced and reinforced polyamides using Taguchi method", Composites Part B: Engineering, Elsevier Sc., 55, (2013), 338-344.

(Impact factor 2013-2,602)

Q2* P. Campos, J.R. Ferreira, A.P. Paiva, P.P. Balestrassi, J. Paulo Davim "Modeling and optimization techniques in machining of hardened steels: a brief review", Reviews on Advanced Materials Science, IPME, 34, 2, (2013), 141-147.

(Impact factor 2013-1,287)

Q2* C. Veiga, J. Paulo Davim, A. J. R. Loureiro "Review on machinability of titanium alloys: the process perspective", Reviews on Advanced Materials Science, IPME, 34, 2, (2013), 148-164.

(Impact factor 2013-1,287)

Q3 S. Basavarajappa, J. Paulo Davim, "Influence of graphite particles on surface roughness and chip formations studies in turning metal matrix composites", Materials Research, Univ. Fed. Sao Carlos, 16, 5, (2013), 990-996.

(Impact factor 2012-0,483)

Q1***** R. Ashok, K. Palanikumar, B.K. Ragunath, J. Paulo Davim "Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition", Materials & Design, Elsevier Sc., 48, (2013), 52-57.

(Impact factor 2013-3,171)

Q3 A. Baradeswaran, A. Elaya Perumal, J. Paulo Davim "Effect of B4C on mechanical properties and tribological behaviour of AA6061-B4C composites", Journal of the Balkan Tribological Association, 19, 2, (2013), 239-248.

(Impact factor 2013-0,321)

Q1 R. Suresh, S. Basavarajappa, V. N. Gaitonde, G. L. Samuel and J. Paulo Davim "State of the art in machining of hardened steels", Journal of Engineering Manufacture, Proc Instn Mech Engrs Part B, Sage, 227, (2013), 191-209

(Impact factor 2013-0,661)

Q1**** T.J. Grilo, R.M.F. Paulo, C.R.M. Silva, J. Paulo Davim "Experimental delamination analyses of CFRPs using different drill geometries", Composites Part B: Engineering, Elsevier Sc., 45, (2013), 1344-1350.

(Impact factor 2013-2,602)

 

2012

 

Q2* C. Veiga, J. Paulo Davim, A. J. R. Loureiro "Properties and applications of titanium alloys: a brief review", Reviews on Advanced Materials Science, IPME, 32, 2, (2012), 133-148.

(Impact factor 2012-1,017)

Q1* V. N. Gaitonde, S. R. Karnik, J. Campos Rubio, A. M. Abrão, A. Esteves Correia, J. Paulo Davim "Surface roughness analysis in high-speed drilling of unreinforced and reinforced composites", Journal of Composite Materials, Sage, 46, 21, (2012), 2659-2673.

(Impact factor 2012-0,936)

Q1** T. Rajmohan, K. Palanikumar, J. Paulo Davim "Analysis of surface integrity in drilling metal matrix and hybrid metal matrix composites", Journal of Materials Science & Technology, Elsevier Sc., 28, 8, (2012), 761-768.

(Impact factor 2012-1,198)

Q1** M. A. Câmara, J. C. Campos Rubio, A.M. Abrão, J. Paulo Davim "State of the art on micromilling of materials, a review.", Journal of Materials Science & Technology, Elsevier Sc., 28, 8, (2012), 673-685.

(Impact factor 2012-1,198)

Q2* C. Maranhão, J. Paulo Davim "Residual stresses in machining using FEM analysis: a review", Reviews on Advanced Materials Science, IPME, 30, 3, (2012), 267-272.

(Impact factor 2012-1,017)

Q4 P. Cardoso, J. Paulo Davim "Micro milling of metalic materials: a brief overview", Transactions of Famena, University of Zagreb, 36, 2, (2012), 79-85.

(Impact factor 2012-0,232)

Q3 L. R. Silva, A. Abrão, P. Faria, J. Paulo Davim, "Machinability study of steels in precision orthogonal cutting", Materials Research, Univ. Fed. Sao Carlos, 15, 4, (2012), 1-7.

(Impact factor 2012-0,516)

Q1 V. N. Gaitonde, S. R. Karnik, J. Paulo Davim, "Optimal MQL and cutting conditions determination for desired surface roughness in turning of brass using genetic algorithms", Machining Science and Technology, Taylor & Francis, 16, 2, (2012), 304-320.

(Impact factor 2012-0,840)

Q2* C. Maranhão, J. Paulo Davim "The role of flow stress and friction coefficient in FEM analysis of machining: a review", Reviews on Advanced Materials Science, IPME, 30, (2012), 184-188.

(Impact factor 2012-1,017)

Q1**** V. Krishnaraj, P. Karthi, A. Ramanathan, Elanghovan, S. Mouleeswaran, R. Zitoune, J. Paulo Davim "Optimisation of machining parameters at high speed drilling of Carbon Fibre Reinforced Plastic (CFRP) laminates", Composites Part B: Engineering, Elsevier Sc., 43, (2012), 1791-1799.

(Impact factor 2012-2,143)

Q1** A. Krishnamoorthy, S. Rajendra Boopathy, K. Palanikumar , J. Paulo Davim "Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics", Measurement, Elsevier Sc., 45, (2012), 1286-1296.

(Impact factor 2012-1,130)

Q1* S. Kumar, S. R. Chauhan, P.K. Rakesh, I. Singh, J. Paulo Davim, "Drilling of glass fiber/vinyl ester composites with fillers", Materials and Manufacturing Processes, Taylor & Francis, 27, 3, (2012), 314-319.

(Impact factor 2012-1,297)

Q1* K. Palanikumar, B. Latha, V. S. Senthilkumar J. Paulo Davim, "Analysis on drilling of GRFP composites using grey relational analysis", Materials and Manufacturing Processes,  Taylor & Francis,  27, 3, (2012), 297-305.

(Impact factor 2012-1,297)

Q2* P. Cardoso, J. Paulo Davim "A brief review on micromachining of materials", Reviews on Advanced Materials Science, IPME, 30, (2012), 98-102.

(Impact factor 2012-1,017)

 

2011

 

Q1* V. N. Gaitonde, S. R. Karnik, J. Campos Rubio, A. Esteves Correia, A. M. Abrao, J. Paulo Davim "A study aimed at minimizing delamination during drilling of CFRP composites", Journal of Composite Materials, Sage, 45, 22, (2011), 2359-2368.

(Impact factor 2011-1,068)

Q1* C. Maranhão, J. Paulo Davim, M. J. Jackson "Physical thermo/mechanical behavior in machining an aluminium alloy (7075-O) using polycrystalline diamond tool", Materials and Manufacturing Processes, Taylor & Francis, 26, 8, (2011), 1034-1040.

(Impact factor 2011-1,058)

Q1* J. Campos Rubio, T. H. Panzera, A. M. Abrao, P. E. Faria, J. Paulo Davim "Effects of high speed in the drilling of glass-whiskers reinforced polyamide composites (PA66 GF30):statistical analysis of the roughness parameters", Journal of Composite Materials, Sage, 45, 13, (2011), 1395-1402.

(Impact factor 2011-1,068)

Q1***** U. S. Dixit, S. N. Joshi, J. Paulo Davim "Incorporation of material behavior in modeling of metal forming and machining processes: a review", Materials & Design, Elsevier Sc., 32, (2011), 3655-3670.

(Impact factor 2011-2,200)

Q1** A. Esteves Correia, J. Paulo Davim "Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts", Measurement, Elsevier Sc., 44, (2011), 1000-1005.

(Impact factor 2011-0,836)

Q1 M. Hazarika, S. Deb, U. S. Dixit and J. Paulo Davim "Fuzzy set-based set-up planning system with the ability for online learning", Journal of Engineering Manufacture, Proc Instn Mech Engrs Part B, Sage, 225, 2, (2011), 247-263.

(Impact factor 2011-0,725)

Q1** V. N. Gaitonde, S. R. Karnik, L. Figueira, J. Paulo Davim, "Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modelling", International Journal of Advanced Manufacturing Technology, Springer, 52, (2011), 101-114.

(Impact factor 2011-1,103)

Q1* Harmesh Kumar, J. Paulo Davim "Role of powder in machining of Al-10%SiCp metal matrix composites by powder mixed electric discharge machining", Journal of Composite Materials, Sage,45, (2011), 133-151.

(Impact factor 2011-1,068)

 

 

 

 

Back

 Other International Journals

 

 

r

International Journals

 

C.D. Oliveira and J. Paulo Davim "Machining of a total shoulder arthroplasty prosthesis", Revista Iberoamericana de Ingeniería Mecánica, 19 (2), (2015), 57-69.

 

P..H.S. Campos, J.R. Ferreira, A.P. De Paiva, P.P. Balestrassi, J. Paulo Davim "Modelagem da rugosidade e da vida da ferramenta no torneamento do aço duro ABNT 52100 com cerâmica mista wiper utilizando metodologia de superfície de resposta", Revista Iberoamericana de Ingeniería Mecánica, 189(1), 2015, (71-86).

 

G. Neves, J. Paulo Davim "Finite element analysis of machining of titanium and its alloys - orthogonal cutting (2D) and three-dimensional cutting (3D)", Revista Iberoamericana de Ingeniería Mecánica, 18 (2), 2014, (81-95).

 

S. R. Karnik, V. N. Gaitonde, S. Basavarajappa and J. Paulo Davim "Multi-response optimization in drlling of glass epoxy polymer composites using simulated annealing approach", Materials Science Forum, Trans Tech Publications, 766, (2013), 109-122.

 

F. Mata Cabrera, I. Garrido, J. Tejero, V. N. Gaitonde, S. R. Karnik and J. Paulo Davim "Surface roughness minimization in turning PEEK-CF30 composites with TiN cutting tools using particle swarm optimization", Materials Science Forum, Trans Tech Publications, 766, (2013), 109-122.

 

T. Rajasekaran, V. N. Gaitonde and J. Paulo Davim "Fuzzy modeling and analysis on turning parameters for maching force and specific cutting pressure in CFRP composites", Materials Science Forum, Trans Tech Publications, 766, (2013), 77-98.

 

N. A. Fountas, I. Ntziantzias, J. Kechagias, A. Koutsomichalis and J. Paulo Davim and N. Vaxevanidis "Application of artificial neural network for the prediction of surface roughness in drilling GRFP composites", Materials Science Forum, Trans Tech Publications, 766, (2013), 37-58.

 

N. A. Fountas, I. Ntziantzias, J. Kechagias, A. Koutsomichalis, J. Paulo Davim and N. Vaxevanidis "Application of artificial neural network for the prediction of surface roughness in drilling GRFP composites", Materials Science Forum, Trans Tech Publications, 766, (2013), 21-36.

 

K. Palanikumar, B. Latha, V. S. Senthilkumar and J. Paulo Davim "Application of artificial neural network for the prediction of surface roughness in drilling GRFP composites", Materials Science Forum, Trans Tech Publications, 766, (2013), 21-36.

 

V. Krishnaraj, R. Zitoune, F. Collombet and J. Paulo Davim "Challenges in drilling of multi-materials", Materials Science Forum, Trans Tech Publications, 763, (2013), 145-168

 

M. Faustino, J. Paulo Davim "Thermo mechanical model in orthogonal cutting of Tungsten/Copper composite sintering (WCu25)", Revista Iberoamericana de Ingeniería Mecánica, 16 (2), 2012, (83-92).

 

M. Faustino, J. Paulo Davim "Influence of lubrication on machinability of sintering tungsten/copper composite (WCu25)", Ingeniare: Revista Chilena de Ingeniería, 20 (1), 2012, (114-118).

 

Pedro Cardoso, J. Paulo Davim "Some aspects of micromilling and machine-tools", International Journal of Engineering: Annals of Faculty of Engineering Hunedoara, 10 (1), 2012, (209-211).

 

C. Maranhão, J. Paulo Davim "An overview on commercial software´s in FEM analysis machining", International Journal of Engineering: Annals of Faculty of Engineering Hunedoara, 10 (1), 2012, (137-139).

 

F. Mata, J. Paulo Davim, "Fabricación de micro-componentes mediante arranque de viruta: análisis del acabado superficial en aleaciones de aluminio Y titanio", Revista Ingenieria Industrial,Universidad del Bío-Bío (Chile), Vol.10, Nº2, 2011, (65-80).

 

N. Muthukrishnan, J. Paulo Davim, "Influence of coolant in machinability of titanium alloy (Ti-6Al-4V) ", Journal of Surface Engineered Materials and Advanced Technology, Scientific Research, 1, 2011, (9-14).

 

N. Muthukrishnan, J. Paulo Davim, "An investigation of the effect of workpiece reinforcing percentage on the machinability of Al-SiC metal matrix composites", Journal of Mechanical Engineering Research, Academic Journals, 3 (1), 2011, (15-24).

 

 

 

 

Back

International Conferences

 

 

r

T. Manoharan, S. Irulappasamy, W.J. Thangiah and J. Paulo Davim, "Effect of drill-bit geometry on the hole quality of CNC drilled glass fiber aluminium metal laminates (glare)", Brazilian Conference on Composite Materials (BCCM-3), Gramado, Brazil, August 2016.

 

C. H. Lauro, S. L. Ribeiro Filho, Denison Baldo, Diego Carou, L.C. Brandão and J. Paulo Davim, "Analise da influência do desgaste de ferramentas no micro-corte da liga de titânio Ti-6Al-7Nb", IX Congresso Nacional de Engenharia Mecânica (CONEM-2016), Fortaleza-Ceará, Brazil, August 2016.

 

D. Carou, E. M. Rubio, C. H. Lauro L. C. Brandão and J. Paulo Davim, "Study based on sound monitoring as a means for superficial quality control in intermittent turning of magnesium workpieces", 10th CIRP Conference on Intelligent Computational in Manufacturing Engineering (CIRP-ICME16), Naples, Italy, July 2016.

 

Moisés Batista, J. Paulo Davim, Jorge Salguero, A. Gomez-Parra and Mariano Marcos, "Taylor´s model based analysis of turning inserts too-life in the dry turning of UNS R56400 alloy", International Mechanical Engineering Congress & Exposition (IMECE2014), Proceedings of the ASME 2014-ICEMCE, Code 111737, Montreal, Quebec, Canada, November 2014.

 

S. Singh, I. Singh, A. Dvivedi and J. Paulo Davim, "SiCp-reinforced Al6063 MMCs: mechanical behavior and microstructural analysis", International Conference on Research and Innovations in Mechanical Engineering (ICRIME2013), Proceedings in Lecture Notes in Mechanical Engineering, Springer, 2014, pp 451-464, Lhudiana, India, October 2013.

 

F. Mata and J. Paulo Davim "Estudio comparativo de la rugosidade superficial en processos de torneado conventional y micro-torneado de materiales metálicos y poliméricos para aplicaciones biomédicas", X Congresso Ibero-americano em Engenharia Mecânica (CIBEM10), Porto, Portugal, September 2011.

 

F. Mata, J. Paulo Davim, L. A, De la Calle "Caracterizatión de la calidad superficial en processos de micro-torneado de aleaciones de aluminio y titanio", VI Congreso Ibérico de Tribología (IBERTRIB11), Móstoles, Espanha, Junho 2011.

 

 

 

 

 Back

Editorial Journals and Book Reviews

 

 

r

N.K. Batra, K.K. Goyal, R.K. Phanden and J. Paulo Davim, Editorial, "Special issue: Advancements in Modern Machining Methods", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.18 Nº4, 325-326, 2016.

 

V. Krishnaraj, R. Zitoune and J. Paulo Davim, Editorial, "Special issue: Advances in machining of aerospace materials", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.18 Nº1/2, 1, 2016.

 

C. Machado and J. Paulo Davim, Editorial, "Special issue: Management and engineering, matching humamn and technological needs", International Journal of Manufacturing Technology and Management, Inderscience (UK), Vol.30 Nº5, 277-278, 2016.

 

J. Paulo Davim, Book Review, "Drills- Science and technology of advanced operations  by Viktor P. Astakhov, CRC Press (USA) 2014", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.17 Nº2, 182, 2015.

 

J. Paulo Davim, Book Review, " Higher Education for sustainability by Lucas F. Johnston, Routledge (USA) 2013", International Journal of Higher Education and Sustainability, Inderscience (UK), Vol.1 Nº1, 102, 2015.

 

J. Paulo Davim , Editorial, "Inaugural issue", International Journal of Higher Education and Sustainability, Inderscience (UK), Vol.1 Nº1, 1-2, 2015.

 

J. Paulo Davim, Editorial, "Inaugural issue", International Journal of Materials Forming and Machining Processes, IGI Publishing (USA), Vol.1 Nº1, i-ii, 2014.

 

C. Machado, J. Paulo Davim, Editorial, "Inaugural issue", International Journal of Applied Management Sciences and Engineering, IGI Publishing (USA), Vol.1 Nº1, i-ii, 2014.

 

J. Paulo Davim, Editorial, "Inaugural issue", International Journal of Surface Engineering and Interdisciplinary Materials Science, IGI Publishing (USA), Vol.1 Nº1, i-ii, 2013.

 J. Paulo Davim, Book Review, " Metalworking fluids (MWFs) for cutting and grinding by V. Astakhov and S. Joksch, Woodhead Publishing (UK) 2012", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.13 Nº2/3, 348, 2013.

R. Zitoune, V. Krishnaraj and J. Paulo Davim, Editorial, "Special issue: Machining of Aerospace materials", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.13 Nº2/3, 111-112, 2013.

 J. Paulo Davim, Book Review, " Advances in sustainable manufacturing by G. Selinger, M. Khraisheh and I.S. Jawahir (Eds), Springer (UK) 2011", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.13 Nº1, 110, 2013.

 

J. Paulo Davim, Editorial, "Special issue: Advances in machining processes", International Journal of Materials & Product Technology, Inderscience (UK), Vol.46 Nº1, 1, 2013.

 

R. Zitoune, V. Krishnaraj and J. Paulo Davim, Editorial, "Special issue: Machining of Titanium alloys and composites for aerospace", Materials Science Forum, Trans Tech Publications (Switzerland), Vol.763, 1, 2013.

 

M. Shah, M. Bhat and J. Paulo Davim, Editorial, "Special issue: Functional Nanomaterials for Energy and Environmental Applications", Materials Science Forum, Trans Tech Publications (Switzerland), Vol.760, 1, 2013.

 

J. Paulo Davim, Editorial, "Inaugural issue", Journal of Sustainable Manufacturing and Renewable Energy, NOVA Science (USA), Vol.1 Nº1/2, 1, 2012.

 

R. Singh, J. Paulo Davim, Editorial, "Special issue: Advances in rapid manufacturing of processes and materials", International Journal of Materials Engineering Innovation, Inderscience (UK), Vol.3 Nº3/4, 163, 2012.

 

J. Paulo Davim, Book Review, "Principles of tribology by Wen Shizhu and Huang Ping - Wiley (Singapore) 2012", International Journal of Surface Science and Engineering, Inderscience (UK), Vol.3 Nº3, 256, 2012.

 

K. Chou, J.C. Heigel, J. Paulo Davim, Editorial, "Special issue: Advances in machining process metrology", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.12 Nº3, 193, 2012.

 

A. Bhardwaj, V. S. Sharma, A. Sachdeva, J. Paulo Davim, Editorial, "Special issue: Machining: Challenges, issues and trends", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.12 Nº3, 193, 2012.

 

J. Paulo Davim, Editorial, "Special issue: Develoments in machining technology", International Journal of Materials & Product Technology, Inderscience (UK), Vol.43 Nº1/2/3/4, 1, 2012.

 

P. Franco, J. Paulo Davim, Editorial, "Special issue: Product design, manufacturing processes and continuous improvement", International Journal of Mechatronics and Manufacturing Systems, Inderscience (UK), Vol.4 Nº1, 1-2, 2011.

 

R. Venkata Rao, J. Paulo Davim, Editorial, "Special issue-ICAME 2009", Journal of Mechatronics and Intelligent Manufacturing, NOVA Science (USA), Vol.2 Nº1/2, 1-3, 2011.

 

A. M. Abrão, J. Paulo Davim, Editorial, "Special issue-COBEF 2009", Journal of Machining and Forming Technologies, NOVA Science (USA), Vol.3 Nº1/2, 1, 2011.

 

J. Paulo Davim, Editorial, "Inaugural issue", International Journal of Manufacturing, Materials and Mechanical Engineering, IGI Publishing (USA), Vol.1 Nº1, i-ii, 2011.

 

J. Paulo Davim, Editorial, "Special issue: Advances in meso and micro manufacturing technology", International Journal of Manufacturing Technology and Management, Inderscience (UK), Vol.22 Nº2, 93, 2011.

 

R. Venkata Rao, J. Paulo Davim, Editorial, "Special issue: Advances in modelling and optimisation of materials and manufacturing processes", International Journal of Materials Engineering Innovation, Inderscience (UK), Vol.2 Nº3/4,179-181, 2011.

 

M. Bououdina, J. Paulo Davim, Editorial, "Special issue: Nanoscience and nanotechnology: recent advances, trends and challenges", International Journal of Materials Engineering Innovation, Inderscience (UK), Vol.2 Nº1,1-2, 2011.

 

J. Paulo Davim, Editorial, "Special issue: Advances in machinability of titanium and its alloys", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.10 Nº4, 263, 2011.

 

J. Paulo Davim, Editorial, "Special issue: Advances in drilling of composite materials", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.10 Nº3, 171, 2011.

 

J. Paulo Davim, Book Review, " Advanced modelling of  optimisation of manufacturing processes by R. Venkata Rao - Springer (UK) 2011", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.10 Nº1/2, 168-169, 2011.

 

J. Paulo Davim, Book Review, " Cutting tool technology by Graham T. Smith - Springer (UK) 2008", International Journal of Machining and Machinability of Materials, Inderscience (UK), Vol.9 Nº1/2, 173-174, 2011.

 

 

 

 

 Back

MACTRIB - Department of Mechanical Engineering , University of Aveiro

Campus Universitário de Santiago, 3810-193 AVEIRO, PORTUGAL