|
|
Ü |
Machining Center
"VCE500 MIKRON" |
|
Ü |
Lathe CNC
"MHP KINGSBURY" |
|
Ü |
Dynamometer Piezoelectric
"Kistler
Type 9121" |
|
Ü |
Shock
Acceleromete" Dytan
Instruments Type 3200B3" |
|
Ü |
Profilometer "Hommeltester
T1000" |
|
Ü |
Shop Microscope
"Mitutoyo TM-500" |
|
|
|
Machining Center
"VCE500 MIKRON" |
|
|
 |
|
|
Power: |
11 kW |
|
Maximm Spindle Speed: |
7500 rpm |
|
|
Back |
|
|
Lathe CNC
"MHP KINGSBURY" |
|
|
 |
|
|
Power: |
18,7 kW |
|
Maximm Spindle Speed: |
4500 rpm |
|
|
|
Back |
|
|
Dynamometer Piezoelectric "Kistler
Type 9121" |
|
|
 |
|
|
Description: |
|
|
The multicomponent
dynamometer provides dynamic and quasi-static measurement of the 3
orthogonal components of a force (Fx,Fy,Fz) acting from any
direction onto the top plate.With the aid of options evaluatuion
devices the drilling moment can be measured as well. The dynamometer
has high rigidity and hence high natural frequency. The high
resolution enables very small dynamic changes to be measured in
large forces
|
|
|
The dynamometer
measures the actives cutting forces regardless of its application
point. Both the average value of the force and the dynamic force
increase may be measured. The usable frequency range depends mainly
on the resonance frequency of the entire measuring rig |
|
| Dynamometer application: |
|
|
r Cutting force measurements
during turning and drilling on revolver lathes |
|
|
High sensitivity and calibrated
partial ranges allow accurate measurements on small tools.
|
|
Back |
|
|
Shock Accelerometer
"Dytran Instruments Type 3200B3" |
|
|
 |
|
Back |
|
|
Profilometer "Hommeltester
T1000" |
|
|
 |
|
|
Description: |
|
|
The
Hommel Tester T 1000 represents a modern, easy to
handle, portable. Measurement preparation and measuring runs
are carried out with 4 electronic membrane switches.
Calibration on a regular basis is no longer needed as the
central micro-processor retains a fixed value against which
measured profiles are evaluated. All parameters and measured
values are displayed on a large, 8 digit LCD display. |
|
|
|
A
number of standard surface roughness parameters (Ra, Rz, Rt,
Rmax, tpi, tpa, etc) are available for determining the
magnitude of surface flaws and characterizing the surface
profile.Dependent upon type of parameter meadured, these are
calculated from the unfiltered, measured profile, the
filtered roughness profile or the filtered waviness profile. |
|
|
|
The
benefit of measuring surface topography is to detect surface
flaws which are generated by the manufacturing process. This
allows specific steps to be taken to hold the surface finish
within tolerances permitting the correct function of the
part. It should
be remembered though, that the task of surface measurement
is not to create as smooth a surface as possible. A highly
finished surface is far more expensive to manufacture and
may also function less well than a rougher surface.. |
|
|
|
Back |
|
|
Shop Microscope "Mitutoyo TM-500" |
|
|
 |
|
|
Description: |
|
|
The
Mitutoyo Measuring Microscope TM-500 are easy-to-use,
compact-size measuring microscopes that feature a vertical
supporting column. Designed with measurement of workpiece contours
and inspection of surface features in mind, the TM 500 suports a
wide range of applications from shop-floor inpection, measurement of
tools and machined parts, to precision measurements of test tools in
a measuring room |
|
Back |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|